On Sat, 22 Jul 2017 05:31:25 -0700, Archibald Tarquin Blenkinsopp wrote:

On Sat, 22 Jul 2017 12:36:09 +0100, Bob Minchin
wrote:

Bob Eager wrote:
I am about to fix a small brass plate to the front door. The door is
black, with brass door furniture, so it should look OK (after I've
cleaned the rest of the brass!)

I'd like to use some brass screws, but wondered about security screws
in case some scrote decides to nick it (not sure how likely this is,
though).

Can you get brass security screws, or are they too soft to work? Even
Torx or Torx+pin would be good; I don't really want the 'one way'
ones.

I doubt that you can get brass ones.
I'd opt for stainless steel and a home blackening kit if you want them
to blend in with the door or even a dab of black paint.

Another Bob
There used to bi a trick before security screws came along where one
would file or even cut an angle on the edges of a slotted screw heads
slot. Before

||
||

Modified

\|
|\

As the above hopefully depicts, the screw can be tightened, but trying
to turn the screwdriver anticlockwise allows the driver to rotate rather
than turn the screw. A small incline will push the screwdriver out as it
rotates.

The screw is in for good though it would have to be "extracted".

As I said, I don't really want 'one way' ones. I have fitted some of
those to a back gate before now.



--
My posts are my copyright and if @diy_forums or Home Owners' Hub
wish to copy them they can pay me £1 a message.
Use the BIG mirror service in the UK: http://www.mirrorservice.org
*lightning surge protection* - a w_tom conductor