DIYbanter - View Single Post - Countax C600h lawn tractor

Handsome Jack

posted

Another question. With the cutting height set to 5 the deck wheels are
on the ground so I don't see how it's possible to cut any shorter - is
there any adjustment on the cutter height setting?

You can lower the deck a little more by adjusting the wheels themselves.
Each axle goes through a slot in a metal lug welded to the cutting deck.
Loosen the axle nuts, raise each axle in its slot, and tighten again.
The cutting deck will be closer to the ground.

There are other adjusters, sort of trunnions and things at each corner
of the cutting deck support arms, but they are only there to make the
deck level.

--
Jack