Hi,
Thanks for taking all the time to help me out; much appreciated.

But, I have to replace the Tire itself, as well as the Inner-Tube.

Best way ?

Bob
--------------------------------------------------

On 6/21/2017 4:44 PM, Bob F wrote:
On 6/21/2017 5:21 AM, Bob wrote:
Hello,

Have to repair a kids bike's tire.

Got a new tire, and a new inner tube for.

Have never done this before.

Do I want to install the inner tube into the tire casing before
I try to force it over the rim ?

Or, do I want to put the tire on the rim first, and then try to get
the inner tube, somehow, in ?

Any hints would be most appreciated.

Thanks,
B.


Easiest way is to remove just one side of the tire from the rim. Start
by pushing the bead to the center of the rim width, then prying one
place of the tire over the rim while you make sure the diametrically
opposite part of the bead is centered so it can seat in the saddle of
the rim to minimize the effort needed. You can then pull the old tube
out, and then pull the valve out.

Then, reverse the process, carefully tucking the valve in and through
it's hole, then tuck the rest of the tube into the tire and rim, then,
being careful not to pinch the tube, seat the tire back into the rim,
being careful to push the bead half way around the tire into the center
of the rim as you put the last part of the tire onto the rim to make it
easy.