Thread
:
How to remove washing machine weights
View Single Post
#
4
Posted to uk.d-i-y
Bob Minchin[_4_]
external usenet poster
Posts: 2,640
How to remove washing machine weights
wrote:
Hi All,
Anyone have any idea how to remove the counter weights from the plastic drum on a hotpoint Aqualtis washing machine? Rather than the usual bolts, it appears to have a plastic sleeve with a spring inside it. Almost as if the role of the spring is to separate the pieces of the sleeve to increase the diameter and therefore hold onto the concrete.
Any help greatly appreciated - currently have washing machine in bits
thanks
Lee.
I fear those will be a one time push fit device to cheapen production.
Once on never off. There might be a special tool to compress them but I
bet the spring will be pretty strong for that application.
Good luck
After much searching I finally came across this video. It looks like it is in Russian but this is the thing. So anyone any ideas on how to fashion this special tool?
https://www.youtube.com/watch?v=Y_BXT4m3eRI
thanks
Lee
Looks fairly easy in principle as you can get the removal end dimensions
from the spring in situ and then make the fitting end to fit the spring
once removed.
All depend what facilities you or local mates might have.
Always worth befriending a model engineer with lathe and mill.
Good luck
Reply With Quote
Bob Minchin[_4_]
View Public Profile
Find all posts by Bob Minchin[_4_]