View Single Post
  #4   Report Post  
Posted to sci.electronics.repair
John Robertson John Robertson is offline
external usenet poster
 
Posts: 907
Default iPad screen - bar in middle - anyone found a fix?

On 2017/04/06 12:57 AM, Clifford Heath wrote:
On 06/04/17 17:06, John Robertson wrote:
Has anyone here taken apart an iPad (original - cellular) screen to
repair the problem of a fat (1" wide) band fully across the middle of
the screen? The band runs horizontally in the normal (narrow side
horizontal, button down) position.

I have extracted the screen from the iPad, but am a little reluctant to
continue tearing it down to find the potential connection issue without
knowing what I am facing


What makes you think it's a connection issue?
More likely a problem with a driver chip, and the panel is toast.

Clifford Heath.


I wasn't sure if it was a connection issue or not, but it does flicker.
Indeed it could well be a driver chip that is built into the screen and
I imagine that is irrepairable. I just haven't poked inside one of these
displays before and it is for one of my grand-daughters.

It appears I have nothing to loose by trying to open the screen up
further so wish me luck!

I have tried reseating the connector to the motherboard so have
eliminated that as a suspect.

If I have any success I will report back - silence means the screen is
toasted and I won't waste anyone's reading time further.

John :-#)#
--
(Please post followups or tech inquiries to the USENET newsgroup)
John's Jukes Ltd. 2343 Main St., Vancouver, BC, Canada V5T 3C9
(604)872-5757 or Fax 872-2010 (Pinballs, Jukes, Video Games)
www.flippers.com
"Old pinballers never die, they just flip out."