Thread
:
Rising machine tool prices
View Single Post
#
16
Posted to rec.crafts.metalworking
DoN. Nichols[_2_]
external usenet poster
Posts: 2,584
Rising machine tool prices
On 2017-01-16,
wrote:
[ ... ]
Sears made a good 10-in. flat-way lathe, built by Atlas, and a
smaller, 6-in. machine that Jim mentioned. I had one. Like many others,
I bent the spindle and had to turn a new one in my 10-in South Bend. g
Actually -- there were *two* Sears 6" lathes. The one which had
an easily bent spindle was the AA brand, the other was a flat-bed Atlas
with a somewhat sturdier spindle. The weak point on that (I had one)
was the T-slot in the compound. A parting tool caught in some square
stock and snapped off the inboard half of the T-slot. I wound up making
a much sturdier replacement for that. :-)
Later versions of the Atlas lathe had roller bearings, mine was
old enough to have bronze bearings -- and rather worn when I got it.
Some were good. Others were not.
Agreed.
Enjoy,
DoN.
--
Remove oil spill source from e-mail
Email: | (KV4PH) Voice (all times): (703) 938-4564
(too) near Washington D.C. |
http://www.d-and-d.com/dnichols/DoN.html
--- Black Holes are where God is dividing by zero ---
Reply With Quote
DoN. Nichols[_2_]
View Public Profile
Find all posts by DoN. Nichols[_2_]