On 24/11/2016 04:05, Bill Wright wrote:
On 24/11/2016 02:53, John Rumm wrote:
As I have needed to do a few installations recently which were all
surfaced wired, I though I would lob the few photos I had into an
article with some tips on wiring surface stuff.

What I got so far was:

http://wiki.diyfaq.org.uk/index.php/Surface_wiring_tips

In the first shot (ceiling light) I would have put the cable at the very
top of the joist rather than roughly half way up. It would have looked
much better. And I would have used twice as many clips, and I would have
spaced them evenly. I would have had a shorter pendant cable to minimise
the chance of the lamp getting knocked. But a four or five foot
fluorescent fixed to the bottom of the joist would have been far better
anyway.

Did you miss the bit about it being a summer house (and hence not my
domain!) ;-)

(I did suggest a strip light (mostly in jest) the response was not
favourable it has to be said!)


--
Cheers,

John.

/================================================== ===============\
| Internode Ltd - http://www.internode.co.uk |
|-----------------------------------------------------------------|
| John Rumm - john(at)internode(dot)co(dot)uk |
\================================================= ================/