On Thursday, 24 November 2016 02:53:02 UTC, John Rumm wrote:
As I have needed to do a few installations recently which were all
surfaced wired, I though I would lob the few photos I had into an
article with some tips on wiring surface stuff.

"In this example a surface box was used to make the transition from the flat T&E cable (switched by a remote stat, in turn fed from a fused connection unit)) to the high temperature butyl rubber flex that feeds the heater."

I would have used a flex outlet plate with a cord grip.

I may be able to put some minitrunking and skirting trunking photos up later.

Owain