$75 to $100 for a projection set, in your dreams.
Given the size, looking at an in home service call, around $50 to the door,
plus around $125 labor plus parts typical. Well under $300 most of the time
for that type of failure. $75 to $100 is not even enough to stay in
business.

David

"Ken G." wrote in message
...
By your description it just needs the vertical ic chip and areas
resoldered & probably a god idea to do a quick ESR check on a few
capacitors in the vert.
300$ to do that is robbery .. take the set to a shop where they are
reasonable around 75 to 100$ for that problem .
If you can solder you could do i yourself .
Cleaning the lenses & mirror would be a good idea while its apart .