On Wed, 26 Oct 2016 18:30:56 +0100, Mr Pounder Esquire wrote:

Simon Mason wrote:
On Wednesday, 26 October 2016 09:29:44 UTC+1, Rod Speed wrote:
Its actually because they are much more reliable when moulded.

I have just fitted 4 LED security lamps and needed to feed 2 core
through a brick wall - I have 20 odd old wire up plugs though so
had plenty to hand.

I do it the other way, cut the moulded socket off an extension lead,
feed the cut end thru the hole in the wall and then wire that into
the light or whatever. Easier with some lights than others.

These lights only come with about 1ft of three way, so you have to
drill a foot long hole in the exterior bricks and feed two core in
from inside, fit a plug and find the nearest indoor socket.

https://pbs.twimg.com/media/CvtPqEOXYAEybSS.jpg

Good grief!
http://www.swldxer.co.uk/kitchen1.jpg

Look at my garage....
https://www.dropbox.com/s/pubh98t82o...82%29.jpg?dl=0

--
There's no way to rule innocent men. The only power any government has
is the power to crack down on criminals. Well, when there aren't enough
criminals, one makes them. One declares so many things to be a crime
that it becomes impossible for men to live without breaking laws.
(Ayn Rand (1905-1982)