Changing out those resistors, especially the old that's packed in close to
the other surface-mounts, is really beyond the capability of most DIY types,
even many techs for that one resistor.

That .PDF was a good one though, I've seen those same issues myself - I just
assume if the fuse is bad, the pickup got hot and shorted through, so it
gets replaced. I've only seen at most 1 or 2 units which functioned reliably
after just the fuse and resistor mod was done.

Mark Z.

--
Please reply only to Group. I regret this is necessary. Viruses and spam
have rendered my regular e-mail address useless.


"Shoreline Electronics" wrote in message
om...
Read this : http://www.iwaynet.net/~nesda/DVDEZ.pdf

Your halfway done!

--
=================================
Jeff Stielau
Shoreline Electronics Repair
344 East Main Street
Clinton,CT 06413
(860)399-1861
(860)664-3535 FAX

=================================
"Mark D. Zacharias" wrote in message
...
Did you clear the solder short (two adjacent solder pads shorted
together
with solder) on the new pickup?

Mark Z.

--
Please reply only to Group. I regret this is necessary. Viruses and spam
have rendered my regular e-mail address useless.


"Dan" wrote in message
om...
This Sony DVD player will not read a DVD or CD disc. Display shows NO
DISC . Replaced the Optical Pick, but it still will not work. Has
anyone seen this defect?