On 19/08/2016 22:59, Roger Hayter wrote:


Facetiousness apart, I am sure your method is a very good one if you get
the holes in the right place and you can drill perpendicularly.



To get the pilot holes perpendicular to the door surface make the jig at
least 2", or more, deep and drill the guide holes with a pillar drill*
through the 2". Clamp the jig to the door and drill through the guide
holes.

* Or with your normal electric drill in a cheap drill stand
http://www.ebay.co.uk/itm/Bench-Powe...-/162047662049
--
mailto: news {at} admac {dot] myzen {dot} co {dot} uk