The horizontal output transistor may also be shorted. Normally the flyback
and HOT are changed together in many cases. If you change these parts, and
do not troubleshoot to find the original cause of failure the new parts will
be damaged upon restart of the set.

After changing the flyback and HOT, finding the cause of failure, changing
all the defective parts, he will then do the high voltage and power supply
tests to see that the set is working safely.

I would strongly recommend you call an experienced service centre to do this
type of repair. There are also many safety issues when working in TV sets.
This is especially true in the scan amplifiers, high voltage sections, CRT
sections, and power supply.

--

Greetings,

Jerry Greenberg GLG Technologies GLG
=========================================
WebPage http://www.zoom-one.com
Electronics http://www.zoom-one.com/electron.htm
=========================================


"Scott Bright" wrote in message
om...
Model: PS36109
Chassis: CTC197CH

Problem: When I turn it on, it clicks on and off a few times then is
quiet. Had it unplugged for 24 hours no change.

I saw in one other post that it might be the "Hv Splitter Box". Can I
order this and replace it myself?

Thanks for any help.

Scott Bright