Using a ball-check oiler for an air tool
Bob Engelhardt wrote:
On 7/31/2016 9:36 PM, Steve W. wrote:
No problem oiling at 5 feet. My inline oil mister is close to 30 feet
from the tools.
OK - I envisioned my drops of oil coating the inside of the hose & never
getting to the grinder. Until the entire hose was coated with, what, 2
oz of oil?
And would mist be different than drops as far getting to the tool?
Thanks,
Bob
Not in any practical use. The oil will move with the air.
--
Steve W.
|