On Fri, 29 Apr 2016 09:55:07 -0700, wrote:

On Fri, 29 Apr 2016 07:23:55 +0100, David Billington
wrote:

On 28/04/16 22:00, Bob Engelhardt wrote:
On 4/28/2016 11:22 AM, Ed Huntress wrote:
And jeez, Iggy, teach someone how to do a proper job with Teflon tape.
... g

Since we're giving Iggy thread advice, let me add this: I sometimes
have a taped joint leak. I never have a leak on a joint where I've
used "paste" sealant. With PTFE or Teflon.

Bob
I've seen plenty of paste sealant joints leak whether done by myself or
professional gas fitters on various pressure systems including low
37mBar systems. They should always be checked.
Of course they should be checked, that's how I knew every joint I made
with teflon tape on that crappy black iron pipe leaked, and how I knew
none leaked when I remade them with the paste. Only a fool would
assemble a joint that's supposed to be leak free and not test it.

Eric

How many layers did you put on? As the size of the pipe increases, you
need more layers. With 1-inch pipe, I use three layers.

--
Ed Huntress