On 3/5/2016 8:16 AM, DerbyDad03 wrote:
On Saturday, March 5, 2016 at 7:46:12 AM UTC-5, Stormin Mormon wrote:
Anyone wish to answer the OP's OQ?


It was answered within hours of your question, with a qualifying "if".
Since you never directly addressed the "if" it's on you.

I'll make it easy for you:

If this "if" is true, then you already have your answer:

"No if this is the service disconnect enclosure where the ground
electrode conductor lands and the main disconnect resides..."

If that "if" is not true, then you need to tell us more about
the installation. In other words, if the service disconnect is
not in the panel you are asking about, then where is it?


The power comes from the pole to a meter box,
which is outside the house. The power company
can remove the meter and put plastic boots over
the contacts, so I'd dare to say that is a
primitive service disconnect.

I've not been out that side of the house in
several years. don't know how the ground
bar in the ground connects in to the matter.
But, I do know the meter is outdoors.

There is some kind of cable from the meter box
to the circuit breaker panel. The question is
about the circuit breaker panel.

The ground wire in question comes in from outdoors
(in a plastic wrapped sheath with two hots and a
neutral). The ground wire presently connects to
the same metal bar, about an inch from where the
neutral connects.

It is possible (enough wire to work with) to move
the ground wire (from outdoors) to a screw connector
on one of the two ground screw bars.

I'm not a code reading electrician, and thank you
for making it easy for me.

--
..
Christopher A. Young
learn more about Jesus
.. www.lds.org
..
..