On Wed, 17 Feb 2016 11:32:48 -0500, burfordTjustice
wrote:

On Tue, 16 Feb 2016 20:37:44 -0500
wrote:

On Tue, 16 Feb 2016 16:58:46 -0700, Don Y
wrote:

In preparation for house paint (probably this Summer/Fall),
I'm trying to decide what to do with the porches. Exterior
of each is cheap, painted paneling. Rest of house is stucco
over block.

I could stucco both but that seems pretty boring.

Another option is tongue and groove planks -- possibly set
at a 45 to the floor (for a "swept" look). Natural stain.

Yet another option (my favorite) is a fitted stone facade.
But, the sort where there are no grout lines -- just very
tightly fitted stones (the stones having shapes similar
to *bricks* -- of various sizes). I.e., the wall feels
almost flat -- but rough.

They are not structural -- perhaps just a couple of inches thick
(front to back) and no stone/brick is more than an inch or two
"tall".

A cursory look at these sorts of walls (usually on commercial
establishments, not residences) *suggests* that they are individual
stones and someone just was incredibly patient/lucky to manage
to ALWAYS find "just the right stone" for the odd shape that
needed to be filled.

I'm pretty sure I don't believe that! I suspect they are
prefabbed in some way (like the little 1" tiles you encounter
on bathroom floors -- sold in 12x12" SHEETS (so you don't have
to set each individual tile!). But, the arrangement of
"cracks"/edges is so busy that it's virtually impossible to
*see* an underlying pattern!

Can anyone confirm that they are, in fact, sold as "assemblies"?
That I don't have to budget weeks of time to preisely fitting
a gazillion little rectangular blocks?

And, as there appears to be no mortar (between "courses"),
how they are attached to the structure?

You have natural stone like this
http://www.nsvi.com/
You also have man made products like this
http://www.eldoradostone.com/

If you are somewhat far away you can use the Eldorado stuff but up
close you want the natural stone.
The cultured stone is very regular in height and you just stack them
up. The natural stone can be diamond cut or split. Diamond cut is very
regular too. The split stone looks better but there is a lot of hand
fitting. We made an entertainment center, electric fire place etc with
the split NVSI stone and I thought it came out well but doing the
puzzle takes a little time.
http://gfretwell.com/ftp/cabinet/Our...s/image010.jpg
This is mostly done in this picture but I had not finished the wood
trim, the kicks and the far panel.
http://gfretwell.com/ftp/cabinet%202015.jpg
All of the panels open and the whole thing is on wheels.
http://gfretwell.com/ftp/cabinet%202015%20open.jpg
You put down expanded metal stucco lath, mortar it and stick on the
stone like you would do tile. I like "flex" mortar because it really
sticks. Then use a wet tooth brush to remove any mortar that squeezes
out. That usually means you used too much mortar.

that looks very cool!

I still have to finish the wood trim. We are looking for more of the
"live edge" cypress like we have for the mantel piece over the fire
place. The guy we got that one from died. I want to bring that all the
way around the waist band. I have the cypress to do the end caps but I
want to fit it to the live edge stuff.