Have you tried http://metalsupermarkets.com/portland/metals/
Altho they are quite a drive for me from the far west side. I got some 3/8x3/4 bar
from them for use on my tablesaw and am quite satisfied with the product.
Art


"Tim Wescott" wrote in message
...
I would really, really like to get my hands on some 3/16" x 1/2" aluminum
bar -- 2024 would be nice, but 6061 would be acceptable. 3/16 x 3/8
would be acceptable, too, but if I had to have one it would be 3/16 x 3/8.

I need it for motor mount pads for model airplanes.

I have some 1/2" square bar aluminum Mystery Alloy (I suspect 2024), out
of which I can make what I want, but it challenges the accuracy and
strength of my (crappy) 3-in-1 machine.

Is there some place that just sells the stuff in cut-off lengths?

If not, does anyone on the list have some 3/16" thick plate of some
suitable alloy of which you're willing to whack me out some pieces?

I'll be making some pads that are 2" long and some that are 2-1/2, and
maybe some in between, so having some foot-long (or so) bars makes more
sense to me than having a bunch of pieces that are cut to length.

--

Tim Wescott
Wescott Design Services
http://www.wescottdesign.com