"Open rollout switch circuit" error message in furnace.
bob_villain wrote:
On Monday, January 11, 2016 at 2:04:49 PM UTC-6, wrote:
Make sure there is no water in the draft inducer or any of the vacuum
hoses due to condensation accumulatig where it shouldn't
+1 The collection of condensate lines usually go to a box, which might have a mess of crud clogging it.
My understanding of roll out switch is over heating by some cause.
The switch usually has a tiny button(usually red in color) which will
pop when triggered. First thing to try is try again after resetting the
switch by pushing the button in. To get out of lock out state, turn the
power off, wait a few seconds and turn back on.
|