I once successfully glued a broken nut, and it lasted another two years.
Luckily I managed not to let the glue glue it to the thread.
Brian
--
From the Sofa of Brian Gaff Reply address is active
Remember, if you don't like where I post
or what I say, you don't have to
read my posts! :-)
"Harry Bloomfield" wrote in message
. uk...
jkn submitted this idea :
OK, I now learn that they are called 'shade rings', or 'lamp rings'. So
at least I can get hold of some.
Still interested in a decent 'shade ring tool' or ideas for easing the
turning...
J^n
I don't know if this might help, but they used to sell a spring steel clip
to replace shade rings, stamped out of sheet metal. You just squeezed its
arms and it released the shade.
Another variation used a thin metal spring arms, which you held together
to remove the shade, but the shade needed to have a larger than normal
hole for the squeezed together arms to be able to pass through. It would
be held in place by a normal shade ring.
--
Regards,
Harry (M1BYT) (L)
http://www.ukradioamateur.co.uk