Leon wrote:
On 11/21/2015 9:53 AM, Swingman wrote:
On 11/21/2015 12:15 AM, Leon wrote:
I was never a draftsman but was headed in that direction when in school.
The trouble with paper and pencil is that the drawing, and especially if
not to scale, only gives you an ideal/concept. It does not necessarily
give correct dimensions. You can put dimensions on the drawing but if
not to scale you have no way to guarantee if the drawing is doable with
the dimensions you want.
With software you have the ability to have the program double check your
thoughts.

Lacking the necessary gene to envision what a design looks like when
seen with a pair of eyeballs six feet off the ground, and from different
angles and distances, is precisely why I was excited to see computer
based 3D modeling technology, like SketchUp, become readily/affordably
available.


;~) I was damn good at drafting in school, I have a few ribbons.
Strange I did not peruse a career in that direction and today probably
glad that I did not. I think ultimately it was architectural drafting
that turned me off on drafting.

Anyway I used a t-square and triangles up until 1986. That was when I
got my first computer and a few months later bought my first CAD like
program, IMSI Designer. Its was strictly 2D and specific length lines
were determined by how many times you hit the arrow key. There was not
Direct Distance Entry like most all CAD programs have now.
Fortunately you could easily change the distance each key stoke
represented.
Probably after a dozen program/upgrades changes I think you and I
finally made the permanent switch to Sketchup at about the same time.
Sketchup as a tool is as important as any tool in my shop. And as you
mentioned it gives you immediate visual confirmation of how the project
will look.



I did some drafting when I thought I wanted to be an engineer. Back
then it was SHARP pencil, t-square, triangles, and dividers to take a
measurement off the ruler. For final we had to do it in India ink.
Blueprints were really blue. Those were the days of slide rules with
a carrying case that fastened to your belt. I still have my K&E
drawing set.

--
GW Ross

Why isn't 'phonetically' spelled that
way? --Steven Wright