Thanks JURB..
Yes its got a few years on it.
The pots are just behind the front panel
BUT they are not marked as to there
functions its a guessing game .
I remember the older Mits had a procedure
like adjust Number 1 pot then Number 6 pot etc etc.

Thanks again

kip


--
"Watch the return E-Mail addy its false"
"JURB6006" wrote in message
...
hitachiserviceusa.com I believe.

You'll need a user and pass to get in. Just apply, they send you an email.

If this is a newer set they got a cursor based adjustment procedure. There
is a
hidden button in front that activates the adjustment mode, when you hit it
it
displays a nice fine crosshatch. Bear in mind the set must be displaying a
"kosher" NTSC interlaced signal, such as what you get from a TV station. A
VCR
output is not acceptable due to time base errors. This stuff is usually
frequency sensitive.

There may be a twop pronged plug on the PCB to your left as you look into
the
front of the set. If uand only if/u there is no hidden button, this
will be
the point to short.

Be careful, wait a bit, someone may post how to save your changes, I don't
recall right now. It might be automatic, but there is a recalculate
function
you are supposed to do.

JURB