On Wednesday, October 7, 2015 at 7:24:00 AM UTC-5, Stormin Mormon wrote:
On 10/6/2015 11:09 PM, Ed Pawlowski wrote:
On 10/6/2015 9:59 PM, bobmct wrote:
Recently installed 3 combo and 4 smoke only OneLink wireless devices.
All were set and programmed per the instruction sheet. All
individually test OK when using the test button. However, how can one
determine if all are communicating when an actual alarm occurs?
Testing seems to test only the individual unit. Any ideas? I can
find no such info on the Mfgs web site or in the supplied manual.

Thx


Fry a pound of bacon
Sear a steak
Light a candle and blow it out under the detector
Set the cat's tail on fire
Burn toast
Burn a crumpled newspaper in a tray and blow it out so the smoke reaches
the detector

Nevermind all the work arounds. he wants a real
test: Burn the house down.
-
.

Here at the center the individual rooms have a through the wall AC and electric heater. When the heater is first turned on after a season of air conditioning, the dust collected on the electric heating elements burns off and the smoke alarm in the room goes off. Dang they're loud. o_O

[8~{} Uncle Smoke Monster