"Carl Ijames" wrote in message
...
"Lloyd E. Sponenburgh" lloydspinsidemindspring.com wrote:

I got in a hurry on a job, and had to run 10-mi to the scrapyard for
some
heavy 4" angle, rather than driving the 80-mile round-trip to the
only
distributor around. It ended up being some 9.8lb/ft 4x4 angle (so,
pretty heavy angle, 3/8" flanges).

They had only one piece that would suit: It was obviously hot-dip
galvanized (no problem in itself), had cut ends (after galvanizing),
and
had sat in the yard, in the weather (wet) for weeks to months before
I
rescued it.

It welds perfectly with mild steel MIG wire and CO2. Did some test
welds
before comitting to all the cutwork I needed to do on it. It made
clean,
smooth, STRONG welds that I could not break even bending the piece
at the
weld... it just bent there, being just a line-weld, and thinner than
the
flange.

'Funny thing, though, none of the few gouges and dings in it had
even a
trace of rust. Neither did the cut ends ??? I did some fresh cuts,
exposed them to overnight dew and 85F temps (just to see), and not a
SIGN
of corrosion.

Hmmm... I'm not familiar with the alloy. It's obviously NOT any of
the
3xx series stainless I often work with, and although those will
braze,
and will weld Eh..OK with mild steel wire, they don't usually
produce as
strong a weld as the base metal. It's also as strongly magnetic as
A36
would be.

My experience has been that when heavily galvanized members like
this
show up in the scrapyard, they've often come from power company
pull-
downs.

Has anybody worked with a steel that demonstrates these properties?
I
think I'd like to find more of it! G

Any chance that scrapyard, or any other within whatever your
curiosity-driven driving distance tolerance is, has one of those
handheld x-ray fluorescence analyzers that will tell you the
composition? Or is there a 4 year college nearby? If so, call the
chemistry department and ask who teaches the undergraduate
instrumental analysis course and when they have their office hours
and pay them a visit with a sample they can use in the course as an
unknown, along with an appropriate beverage :-). If those don't
work and you really want to know, I'm sure you can find online
companies that will do the analysis for real $$$.

-----
Regards,
Carl Ijames

http://www.scrapmetaljunkie.com/241/...sting-metals-2