Hi John I appreciate your help but I still have a minor vertical problem. I
was just looking at the picture on the ToshibaTV , after
replacing those caps (red 1 uf 50v) and (blue 0.47 uf 50v which was very
close to the IC ) and I notice there is still a small 2 inch black raster
on the top of the picture. When I first looked at the picture, I was just
looking at the blue screen and it is perfect without video, I use to get the
1 inch black bar on the bottom and possibaly the top of the blue screen
before I change the caps
you mention, as soon as i put on a video the 1 inch black bar comes on to
the top of the pic. I adjusted the vertical size pot and I got the picture
to fit the whole screen , but there is still a very little noise on top of
picture and when i go back to the blue screen the vertcal is oversized. I
adjusted the pot off the factory red alignment markings, which I
believe I shouldnt have to do if the vertical alignments are correct, Is
there a Cap I might of miss or some other problems. Maybe the IC I was
looking at is not the jungle IC, cause I notice there was another IC on a
vetical board TA8615N, Do you have the Jungle IC # on hand?

Thanks, your help is appreciated

Jerry

"john" wrote in message
.. .
Jerry
Look close by the jungle IC for a small filter cap maybe Red or Brown or
even Orange in colour
should be abt 1mfd ..change it.

kip

--
"Watch the return E-Mail addy its false"
"Jerry" wrote in message
.. .
I am having a vertical problem with the 27 inch, TV. I have a 1 inch
black
space at the bottom of the raster. I changed all the vertical associated
caps and the vertical IC AN5521 , but same problem, any help would be
appreciated also any copy of the schematics would help . Thanks

--
Best Regards,

Jerry Chanderpaul
Voice905) 678-2422
fax905) 678-0244
www.simex.ca

Simex!Iwerks Inc.
2999 Drew Rd #17
Mississauga, On L5S-1A3