On Sunday, September 27, 2015 at 10:44:07 PM UTC-5, Ruth wrote:
replying to Scott Townsend, Ruth wrote:
scott-i wrote:

I'm working on putting in Cement pads for my Well and 5000 gal Water
Storage
Tank. The tank is about 40' away from the Well.
I want to make sure I make the Pads big enough for the equipment. I'd
like
to just have the Tank there on its own and then have lines back to the
Well
Pad for the Feed and Supply. So at the Well Head I'd have the Pump in the
Well, the Buster pump for the stored water, the pressure tank and all of
the
lines to the irrigation, house, etc.
Is there any rule of thumb on how far away the booster pump and Pressure
tank should be from the storage tank?
If the booster pump and Pressure tank are at the well head, they would be
a
foot or so lower in elevation then if they were at the tank itself.
Any Suggestions or diagrams of external tank hookups would be great!
Thank you!



can't locate drawing, pdf http://www.enm.com/scott/water-tank.pdf comes
up as error..............female need this info as I need to install same
thanks,

--

Ruth dear, you're responding to a 9 year old post. If you need some help with a problem, start a new thread here where there are a lot of nice knowledgeable people who would try to help you. ^_^

[8~{} Uncle Post Monster