On 02/09/2015 08:07, larkim wrote:
The wife's set of hedge trimmers have had the gears stripped through repeated jamming on branches which are too thick for the trimmer.
Bosch spares are usually fairly available... although getting all the
parts for some of the models can be more tricky.
Here's a pic.
What's the likelihood of a DIY repair?
https://goo.gl/photos/FeRvseJAQU1diJok7
The smaller helical thread is actually the output shaft of the motor
armature. Its a very common way to finish the shaft on the armature. If
you look at my recent replacement of the aramature on my Makita drill,
its a very similar design:
http://wiki.diyfaq.org.uk/images/e/e...oxArmature.jpg
So you would need to replace the armature is its the shaft that is worn.
Bosch spares can be had he
http://www.mtmc.co.uk/Bosch-Spare-Pa...-12734777.aspx
--
Cheers,
John.
/================================================== ===============\
| Internode Ltd -
http://www.internode.co.uk |
|-----------------------------------------------------------------|
| John Rumm - john(at)internode(dot)co(dot)uk |
\================================================= ================/