HI all,


I recently worked on a customers 61" Sony KP-61xbr200 and although I made
great progress I was hoping someone has seen this problem before I spent
countless hours on this thing

Intial Symptom : Dead Set with high voltage arcing.

Repair - Found Flyback arcing so replaced Flyback.

Symptom - Unit would then click, give high voltage and then shut down. Unit
blinked 8 times on the led meaning audio problem.

Repair - Found shorted TDA7265 on audio board and replaced

Unit now turns on and has video and sound, but convergence is horrible.

Press auto convergence on the front of the TV and gives E12B error with no
effect on convergence. I do not have a service manual for this unit so I am
unfortunatly note able to use this info to isolate a problem.

Entered Service mode and tried to adjust convergence with no effect.

If anyone has a service manual and can give an explanation of this E12B
error that would great or even better if they have incountered this problem
and have a general area to look at that would be of great help. I encounter
few projection sets and unfortunalty have little experience with them. This
unit is also much newer then the units I typically get called out for.

Please no general answers. I am looing for a person that is familiar with
this set and symptom.

Thanks for any and all help.

Fred