On 8/17/2015 2:43 PM, dpb wrote:
On 08/16/2015 7:09 AM, dpb wrote: ...
That's not to say the SS owners won't be also; altho I'd worry
somewhat with them with regards to that long-term reliability of
the electronics without, at least, key component
replacements/updates--the double-edged sword of electronics.
...
Now that there's (finally!) been an apparent retraction on the
tablesaw question, the above query/concern--
what?
Is there a test mode I presume for the electronics or a power-on test
that the brake detector circuitry is operational?
Yes, in fact the brake has to warm up to a minimum set temp before the
saw motor can be turned on. There is a boot sequence much like a
computer has. When the main switch is turned off and back on you must
wait for the solid green light minus the blinking red light before you
can power up the motor.
What sort of warranty and maintenance schedule is given for the
electronics outside of the saw mechanicals, any?
Warranty IIRC is 2 years. No maintenance schedule other than replacing
a brake if it fails the boot test.
Wonder what sort of failure rate there's been in the field; they've
been out approach 10-yr now or so?
Early on I heard of several that were linked to the environment. As I
understand it SS worked with the owners to resolve the issue. IIRC one
involved a particular type watch the operator was wearing.
On the subject in the other subthread regarding
"patent-infringement-avoidance" engineering, I first heard of the SS
patent and brouhaha with the established manufacturers while still
employed in the new product development section (before dad passed
away that was the impetus for the move back to the family farm).
Being as such non-contacting measurements were our forte albeit in
other fields of application and that was a moderately avid
woodworker, it intrigued me personally about whether could manage to
work around their patents if it were to come to it. I did have a
couple of ideas, one of which did make a lab prototype of the
detection circuitry that did function that I think could be developed
to do the job. It's not quite up to the "neatness" factor of the SS
technology, but convinced me the other manufacturers could, if they
were to choose to do so, build a similar capability and circumvent
the SS patent. I expect they all have something similar in their
development labs and are simply waiting to see what, if anything,
actually comes out of CPSC rulings first.
--
There are actually 2~3 other methods of preventing injury being
experimented with and in fact Bosch has a TS now that works in a similar
manner but does not damage the blade. Another has some type proximity
sensor that stops the blade. IIRC Bosch is suppose to be introduced
some time this year. Technically a bench top sized saw Like the latest
SS and about $100 more than the new SS.
http://www.digitaltrends.com/home/bo...axx-table-saw/