(Tom) writes:

I've got a copy of the AN6562 datasheet I could send you (3 page
.pdf)if you can't get if from Freetradezone, but I didn't see any

Thanks, I did find it on freetradezone.com.

mention of the AN6516N in the Panasonic CD catalog or databooks that I
have. It does say that their part numbering system uses 'AN' for
analog IC's, the '65' is op-amps, and the 'N' is an "improved" part
(over the AN6516). The part wasn't listed in their 'maintenance' or
'discontinued' sections, either.
Is the age of the photocopier such that the 249 on the AN6562 could be
a date code (49th week of '02)? If not, what would be the likely age
of the part?

It's the HV power supply for a Panasonic KX-P4430 laser printer. So, that
could indeed be a date code.

Perhaps, someone might have more info on the specs of this unit. It has
3 outputs: +HV which seems to be not regulated but current limited, varies
with input voltage; -HV which is voltage regulated to about 5 kV, and a low
voltage low current output of about 100 V, adjustable with a user pot.

So if AN65 is for op-amps, I should just see if it makes sense as a
quad op-amp with standard pinout.

No big deal, more out of curiosity than anything else.

Thanks.

--- sam | Sci.Electronics.Repair FAQ Home Page: http://www.repairfaq.org/
Repair | Main Table of Contents: http://www.repairfaq.org/REPAIR/
+Lasers | Sam's Laser FAQ: http://www.repairfaq.org/sam/lasersam.htm
| Mirror Site Info: http://www.repairfaq.org/REPAIR/F_mirror.html

Important: The email address in this message header may no longer work. To
contact me, please use the Feedback Form at repairfaq.org. Thanks.