On 19/06/2015 11:12, Tim Watts wrote:
On 19/06/15 10:54, Big Les Wade wrote:
How do you make cement more sticky? I'm trying to fix down a loose
paving stone (part of some steps). Have used cement:sand at 1:6 as
recommended on packet but it keeps coming loose again.


Damp the slab.

Paint the slab with some cement/water slurry.

Do both for the slab bed.

Use 3:1 mortar (stringest possible mix) *immediately* after applying
slurry which must still be wet, like a coat of honey.


I guarantee you will be hard pressed to separate them after that.

That will work...

Alternatively / additionally you could PVA the slab and bed (50:50
PVA/Water), then apply a cement slurry made with the same PVA mix in
place of the plain water. Only usually necessary for very absorbent stones.


--
Cheers,

John.

/================================================== ===============\
| Internode Ltd - http://www.internode.co.uk |
|-----------------------------------------------------------------|
| John Rumm - john(at)internode(dot)co(dot)uk |
\================================================= ================/