View Single Post
  #8   Report Post  
Posted to uk.d-i-y
Brian Gaff[_2_] Brian Gaff[_2_] is offline
external usenet poster
 
Posts: 1,631
Default Oh dear it seems like a bodge job from someone that IS qualified

They were from that new trade association, distrust a trader.com from your
explanation.
A friend had a Kitchen fitted some 15 years ago and when it came time to
change the cupboards again recently behind the hardboard back of one of the
covers was a junction box fitted into a jagged hole in the wall with one
naill and one screw with all the incoming wires from the under cupboard
lighting wired in in a big bodge. a case of out of sight out of mind
obviously.
I'm always a bit suspicious of traders myself as they do tend to have
bodgers as well as good people on their staff.
Brian

--
From the Sofa of Brian Gaff Reply address is active
"ARW" wrote in message
...
I am not slagging off my apprentice for a change.

http://wiki.diyfaq.org.uk/index.php?...ile:Tapoff.jpg

That is a Bus bar tap off from a 100A bus bar that should have 3 x 16
fuses in the tap off.

When I phoned the ****** who installed it (the co. name was on the install
sticker) to tell him what was wrong he said "someone must have stolen the
fuses I put in".

Of course they did:-)

And the magic pixies also stole the fuses from your other taps offs as
well.

--
Adam