Tony Hwang wrote:
Dottie wrote:
On Sunday, February 8, 2015 at 3:23:03 PM UTC-5, Dottie wrote:
I have a Genie Silentmax 1000 Model 3042 Garage door opener. I
bought it 3-21-2012 at Home Depot so it is mostly out of warranty by
now. Back in Nov. I started having problems. I would press the
opener and the door would go up about two feet - or a little less -
and stop. I couldn't get it to work. My neighbor unplugged it in
the ceiling and when he plugged it up again, it started working. I
called the company that installed it and a man came out and checked
it. He could find nothing wrong. I still paid for his service
call. Less than 30 days later the samee thing happened. A different
man checked it. He found nothing. He suggested I get a surge
protector. We had been having some power outages here. I did not
have to pay a service charge because it was less than 30 days ... A
few weeks later the same thing. I climbed up on the ladder and
unplugged the door opener from my new surge protector. When I
plugged it back in the plastic "socket" chipped off ... it worked
but I wasn't happy with it so I got a new electric socket installed
there - thinking that might be the problem. But about two weeks later
it happened again. Today is the third time...since the new socket was
installed. My son said some of these Genie's had been recalled but I
can't find ours listed.. its Sunday. I am waiting for my neighbor to
come home from work and "listen" to the noise it's making. Haven't a
clue about what the problem is. I really like it when it's working
right ... it is very quiet. Just wondered if anybody else had this
particular model and if they had similar problems. Thanks.


Two questions -- 1. As far as I know it was not disconnected from the
door to see if it was hanging up or overloading the motor.

2. He is right - the door stops half way up. It appears to be
getting the signal. Now ...

My neighbor came over when he got home from work - I had asked him to
... so he could listen and see if he could hear anything unusual. I
had left the door up so when he got here, I pushed the button to close
the door. Guess what? It worked like it was supposed to ... twice.
As if there had never been a problem. I am going to wait and see if I
can find out if anyone else has this problem. Don't want to pay for a
service call because it's too hard to find out what is wrong. Thanks
- and if you hear about the same problem please post it on this board.

Hmmm,
Intermittent, undefined problem! Solution is not easy to find on those
kinda problems but sooner or later we'll nail it.
Hi,
One thing to check is whether sun ray is interfering with Safe-T beam
receiver at certain time of day or season. Picking a receiver position
against possible sun ray interference is bad idea. In that case receiver
and transmitter should be switched around.