On 4/13/2015 6:11 AM, Greg Guarino wrote:

But I read things that confuse me about the ends of these bits;
specifically that they are not designed to cut "forward", only sideways.
Some of those accounts say they cut "forward" OK in wood, just not in
the metal they were designed for.

Did the bit you got have a different sort of end? Or does the relative
ease of cutting wood render the subject moot?

One more thing: The 3/8" adapter you used worked well? Is it just a
split tube or something like that? No worries about a secure grip on an
object spinning so fast?

OK, one more, more thing. I have done the very tiniest bit of metal
milling in the distant past. In those applications (aluminum) the speed
was lower. What speed did you use for wood routing?

Been using these extra long end mills from Travers Tools for routing
mortises over ten years.

The price will scare you, but you get what you pay for. I have cut
literally thousands of mortises with these, haven't had to buy but once,
and use them on both my Multi-Router, and plunge routers, at high speed,
and with Porter Cable collets:

https://picasaweb.google.com/1113554...8 20426286658

Photo is so you can get the part numbers, otherwise it would take a
while to find the correct ones.

http://www.travers.com/342075-20-501...rch=20-501-170

--
eWoodShop: www.eWoodShop.com
Wood Shop: www.e-WoodShop.net
https://www.google.com/+eWoodShop
https://plus.google.com/+KarlCaillouet/posts
http://www.custommade.com/by/ewoodshop/
KarlCaillouet@ (the obvious)