View Single Post
  #34   Report Post  
Posted to rec.woodworking
Gramps' shop Gramps' shop is offline
external usenet poster
 
Posts: 269
Default Centech inspection camera

On Saturday, March 7, 2015 at 9:24:32 AM UTC-6, woodchucker wrote:
On 3/6/2015 12:10 PM, Gramps' shop wrote:
Any of you folks have one of these?

http://www.harborfreight.com/digital...l_s1021_c1015b

The bride jammed a drawer in the china cabinet and no amount of futzing and wiggling will get it open enough to free the jam. I need to drill in from the back and think a scope will be helpful in troubleshooting. Hopefully I can free this with two small holes -- one for the scope and one for the coat hanger.

Comments on this HF unit will be appreciated.

Larry


While this info won't help you, since it seems your need is urgent.
I did some research on this a few weeks ago.

I would avoid the handheld units.
I found that you can get very good long units that plug into your
computer for way less money than the typical handhelds.

__AND.. with a lot more resolution.__



--
Jeff


I decided to pass on the HF unit when they excluded this from the 20% off coupon. Jeff ... can you give me a link to the computer-based unit?