Unquestionably Confused wrote:
On 3/6/2015 11:53 AM, Mike Marlow wrote:
Gramps' shop wrote:
Any of you folks have one of these?

http://www.harborfreight.com/digital...l_s1021_c1015b

The bride jammed a drawer in the china cabinet and no amount of
futzing and wiggling will get it open enough to free the jam. I
need to drill in from the back and think a scope will be helpful in
troubleshooting. Hopefully I can free this with two small holes --
one for the scope and one for the coat hanger.

Comments on this HF unit will be appreciated.


Hey Larry - have you tried a coat hanger or any other sort of device
to move things around from the front of the drawer? This is not an
uncommon occurance in any type of pull out drawer and does not
require the extreme effort of boring holes in from the back and the
use of inspection cameras.

Reading this, I think that I might be tempted to look around and see
if I could locate my 18" stainless steel flat ruler and try sliding
it side to side as I pulled it slowly forward...

Might work - if you can open the drawer just a little bit.

--

-Mike-