On Tue, 12 May 2015 06:47:07 -0700, William Graves
wrote:

On Mon, 11 May 2015 06:34:04 -0700 (PDT), "
wrote:

On Monday, May 11, 2015 at 9:10:21 AM UTC-4, snafu wrote:
On 11-May-15 9:03 PM, wrote:
On Monday, May 11, 2015 at 8:23:10 AM UTC-4, snafu wrote:

Does anyone have any suggestions as to what chemical means might be
useful to lock or bond the (probably stainless) metal connector to the
PVC to prevent unscrewing?

Boat/Marine supply stores have tons of sealants that bond to multiple
materials including PVC and stainless. You might consider Dow Corning
795 - I have used it to bond plexiglass windows to stainless hatches.
It probably would work with PVC but check the materials sheet.

3M 5200 is about as good as it gets and is what Id recommend using. I
swear that stuff will stick moonbeams and unicorn farts together.
Seriously good ****. Taking it apart...that aint happening without
lots and lots of swearing, heat gun, torch, big wrenches and vises....

http://solutions.3m.com/wps/portal/3...4314622&rt=rud

Comes in tiny tubes, big tubes etc etc and its available all over.



Might want to read this

http://www.bindingsource.com/images/...tsBrochure.pdf