View Single Post
  #6   Report Post  
Posted to alt.home.repair
Stormin Mormon[_10_] Stormin Mormon[_10_] is offline
external usenet poster
 
Posts: 10,730
Default Generac 8Kw generator balky start and transfer switch makes clickingsounds

On 12/12/2014 9:44 AM, Danny D. wrote:
Stormin Mormon wrote, on Fri, 12 Dec 2014 08:44:03 -0500:

1) Start with the basics. Change the oil, make sure
the unit is clean and free of dust and debris.


I've never changed the oil, but I doubt that's the problem,
but it's a great idea nonetheless. I'll also take the
battery down to Autozone to have load tested.

It had 536.something hours on the clock when I snapped
that picture of the front panel in the night. I'll look
when it gets light to see how many hours it ran last
night.

2) Look for online forums. And read any paper work
you have with the machine. Might be able to get
the manual from the web site in pdf.


Googling for "Generac model 09067-9 series 8KW HSB"
I didn't find the manual, so, I'm calling them as we type:
http://www.generac.com/service-support 888-436-3722

I think small engines want an oil change every
25 hours or 50, so it's likely over due. I like
Castrol GX, cause it's the one brand that quieted
the rod knock in a truck, I used to have.

Some engines have a low oil shut down DAMHIKT.
That's how I got my first generator, relative
ran one low oil. I'm trying not to let them know
that was the only thing wrong with it. I added
four ounces of oil, and it ran fine. Don't tell
em, please.

Best wishes on the manual. Hope they have good
customer service.

-
..
Christopher A. Young
Learn about Jesus
www.lds.org
..