"Karl Townsend" wrote in message
...
My CNC control computer quit for the umpteenth time due to CPU
overheat...

The little plastic tabs that hold the cooling fan to the CPU keep
breaking off. I found a way to clamp the cooling fan back on when
the
first and second one broke. Friday the third one went. Spent most of
the day Saturday getting a backup computer running. But, I should
get
this repaired.

OK, its a SOYO SY-P4I84PE ISA motherboard. Here's a link that shows
a
picture of it:
http://tinyurl.com/kd7mr2v Note, I can get a used one on eBay for
only $495 or a new one for $1295. guess they won't give ISA slot
motherboards away. I just need the little plastic base that goes
around the slot 478 CPU and the clamp levers (lost one). This has
GOT
to be a part used on other motherboards. Anyone know computers well
enough to know what scrap MB to look for?

Karl

Could you use an aftermarket gamer cooler?
Amazon shows several under $10, or you could spring for a "Scythe
Ninja" for $60.

http://www.xoxide.com/lamptron-fc10s...ontroller.html

-jsw