DIYbanter - View Single Post

Andrew Gabriel

In article ,
(greenaum) writes:
On Tue, 12 Aug 2014 01:56:35 -0400, Spehro Pefhany
sprachen:

A lot of test equipment products have the "port" for the standard
notebook security cable (I think Kingston originated it, but there are
plenty of knock-offs floating aboot).

Ah, you mean "Kensington". A brand-name that's become a standard.

They look very feeble to me. I never tried yanking on one to
destruction, but I find it hard to believe it wouldn't simply
snap the T-piece off the lock.

Sun Microsystem's desktop kit used to have a small (1cm) cube
of metal on the back with two holes drilled through the center.
One hole allowed you to screw the cube to the rear case (the
back of the hole was a smaller diameter to be clamped by the
screwhead). The other hole allowed you to pass a steel cable
through the cube, which when fitted, covered the screwhead so
you can't unscrew the block. I think the block fitted in a
slight recess in the case so you couldn't twist the block
itself to try and unscrew it (a locknut would do the same
if there was no matching recess).

--
Andrew Gabriel
[email address is not usable -- followup in the newsgroup]