wrote:
On Monday, August 2, 1999 3:00:00 AM UTC-4, Victor Levy wrote:
I'd like to replace our lousy old doorbell button with a nice new lighted
one, but before I drill a 5/16" hole in my door jamb I want to know if my
system will light the button. The lighted buttons in the home store say
they work in 10- to 16-volt doorbell systems. How do I determine the
voltage of my doorbell system? (With the system on and working, a voltmeter
across the doorbell button wires reads 0.03V.)

Many thanks for any response,

Victor Levy
South Bend, Indiana, USA
- Remove capital letters for correct address

As the lead electronic PCB designer of the newly introduced line of LED
illuminated doorbell door chimes and lighted "touch" buttons for
Craftmade International's Teiber Lighting division, I agree with
everyone's assessments that your doorbell transformer is indeed a 16VAC
transformer that will show in excess of 16V (like 20V) when unloaded and
read with an AC voltmeter. Therefore, any standard (Lowe's or Home Depot)
lighted doobell button or chime will work with very well your present
transformer. Before you run out and buy a new piece of doorbell hardware,
you might want to take a look at these new, innovative designer-inspired
LED lighted door chimes and LED "touch" doorbell buttons at
http://www.illuminated-doobell.com. Enjoy! Don Ladanyi

The doobel link is foiled.

Those are some complicated switches.

Engineer should Learn usenet.

http://www.illuminated-doorbell.com/...struction.html

Greg