On Sat, 29 Mar 2014 22:09:32 -0400, Ralph Mowery wrote:
I used a propane torch on one that was giving me problems.
Heated it and then it turned free.
Thanks for that idea.
The biggest problem I had in assembly was that I couldn't figure
out the rather simple instructions for the life of me.
http://farm3.staticflickr.com/2874/1...5394358e_b.jpg
The kit came with *two* different types of nylon bushings:
http://farm8.staticflickr.com/7077/1...0dc71f52_b.jpg
One bushing was beveled, and I used that on the horizontal end.
But the other bushing was sqaured, and I couldn't figure out how
to use that squared bushing.
Nothing whatsoever I tried seemed to make any sense.
Googling, I found NOBODY used a square bushing on that end
(they used the square bushing only at the plastic-to-metal interface).
So, I gave up on the square bushing, and re-used an old beveled nylon
bushing instead:
http://farm3.staticflickr.com/2850/1...1c116e5b_b.jpg
QUESTION:
How was I supposed to use the SQUARE nylon bushing?
NOTE: The instructions show it clearly as #3 but those instructions
can't possibly work, as I tried it in that configuration and
if fell apart every time.