best way?
On Wed, 28 Jul 2004 09:25:05 -0700, "furr2ball"
wrote:
I would be grateful for advice on the best way to clean my table saw blades,
solvent, techniques, etc...
I'm a proponent of the try the least toxic, least corrosive method
first concept.
a 5 gallon bucket is about right for 10" blades. if you're going to
stack them put spacers between. you don't want to chip the carbide
teeth.
cover with warm water. a shot of detergent helps, as does a little
vinegar. let them soak for a half-hour.
a light scrub with a soft brass bristle brush should get any stubborn
spots.
rinse and dry.
|