On Tue, 11 Feb 2014 04:47:12 +0000, Bill Wright
wrote:

John Rumm wrote:

No need for the 5A FCU. The 6A MCB or 5A fuse will take care of any
overload.

My reason for including it was not for protection of the wiring, but for
adding discrimination if possible.

Use a 1A or 3A fuse then.

Bill

+1 And, if possible a half amp fuse (the actual draw for a typical
aerial amplifier will be way less than 0.1A). The lower the better in
this instance.
--
Regards, J B Good