"Mark and Kim Smith" wrote in message
...
As part of a project I'm making, I need to make a 4' ring. The outer
circumference, which will be the 4' diameter, will be cut on my band saw
by setting up a jig that has a pivot 2' from the blade. I'm looking for
suggestions for the best way to cut the inner diameter which will be at
2' - 4" giving the "ring" a 10" width. The material is 3/4" thick. So
far I'm thinking my jig saw or my router with a fence set at 10" and
multiple passes. Any other suggestions? As always, thanks in advance!!

round picture frames are typically made in pieces, and joined together with
splines or some such.