I'd plump for D connections every time. I've never known them to fail as
the can have jackscrews and good strain reliefs in the backshells.
Brian

--
From the Sofa of Brian Gaff Reply address is active
"The Natural Philosopher" wrote in message
...
On 06/02/14 18:20, Rick Hughes wrote:
Need to be able to terminate 24 cores inside a plastic projects box ...

Lid of box will have display circuitry ... base of box will have
incoming signal cables ...

It makes sense for this connection to be pluggable ... although it would
only be unplugged in event of failure and need to repair.

Current is only a few mA at mains voltage.

One side of connector could be solder connection and one side screwed or
both screw fitting....
Could use something like :
http://www.rapidonline.com/Cables-Co...l-Block-500713



Anybody got a neater way ...


26 way D type??








--
Ineptocracy

(in-ep-toc'-ra-cy) - a system of government where the least capable to
lead are elected by the least capable of producing, and where the members
of society least likely to sustain themselves or succeed, are rewarded
with goods and services paid for by the confiscated wealth of a
diminishing number of producers.