Alarm system transformer + power supply (would both go bad at once?)
"Danny D'Amico" wrote in message ...
On Mon, 25 Nov 2013 21:02:38 -0500, tm wrote:
You should peel off the double sided tape on the LV Disconnect board and see
if any track has been damaged.
The 1,000uF 35V capacitor leads are burnt a bit, but, it could have been a
replacement cap for all I know, as the cap is not shorted nor is it an open
(it's about 350 ohms steady).
I hope that you realize that you are not getting a reading off of the capacitor.
Most likely that is the resistance of the other components on the board.
|