View Single Post
  #42   Report Post  
Posted to rec.crafts.metalworking
DoN. Nichols[_2_] DoN. Nichols[_2_] is offline
external usenet poster
 
Posts: 2,584
Default Noisy T&C grinder head

On 2013-10-31, Gunner Asch wrote:
On Thu, 31 Oct 2013 05:56:59 -0500, "Lloyd E. Sponenburgh"
lloydspinsidemindspring.com wrote:


[ ... ]

Further, unless you stick it into a running fan, or light it on fire, a
good stethoscope is a one-time purchase.

There are inexpensive electronic versions with contact microphones, too.
I dunno if they'd last forever like mechanical ones do, but if you keep
the batteries stored separate from the tool, one should last many
decades.

Lloyd


Good point.

I bought a stethescope a few years ago for just this need..and found
out it works very well...but a screw driver works Almost as well and
doesnt need any special care in my tool box.


I have one (if I could just find it again) which I bought back
in the 1960s which has both a 'Y' to join both ears to a single pickup,
or dual pickups so you can place one in one location and the other in
another location, and tell by the balance of sound which is closer to
the source of the noise you are tracking.

Enjoy,
DoN.

--
Remove oil spill source from e-mail
Email: | (KV4PH) Voice (all times): (703) 938-4564
(too) near Washington D.C. | http://www.d-and-d.com/dnichols/DoN.html
--- Black Holes are where God is dividing by zero ---