View Single Post
  #58   Report Post  
Posted to rec.crafts.metalworking
Gunner Asch[_6_] Gunner Asch[_6_] is offline
external usenet poster
 
Posts: 10,399
Default Best hold in thin alumium?

On 30 Oct 2013 02:26:39 GMT, "DoN. Nichols"
wrote:

On 2013-10-29, Lloyd E. Sponenburgh lloydspinsidemindspring.com wrote:
"DoN. Nichols" fired this volley in
:

Well ... back in those days, they didn't need metric at least.
My first metric socket set I got for the little 50 cc Honda which I used
on a field trip in Arizona.


I dunno... I bought a 1957 Fiat 1200 Spyder in 1967. There were a lot of
VWs on the road then, but not much else 'foreign'. The Fiat (remember,
from 1957) was ALL metric; not a single Imperial fastener on it.


Well ... yes -- but that was French (or was it Italian?). I
would have been very surprised if they had used a single Whitworth. :-)

I was talking specifically about the MGA series -- 1500, 1600,
and 1600 MK II ('56 trough about '63, IIRC).

Earlier MGs used a lot more Whitworth, and later ones I don't
know about, but it would not surprise me if they added metric to the
collection.


My 61' Royal Enfield/Indian motorcycle is Whitworth.
My M20 BSA messenger bike was Withworth...which I had a much easier
time buying Whitworth tools for back in the 1970s (which went with the
bike when I gave it to my Dad)

Fortunately I have managed to find an excellent Ebay seller in England
who buys used sockets, wrenches and tools and is willing to ship to
the US for very good prices (as a buyer) and he has taken my requests
and shopped for them.

a gentleman who goes under the nym Southcoast999

Unlike this bloody ****ing ripoff...notice his shipping charges for 2
small wrenches

http://www.ebay.com/itm/DRAPER-1-ELO...-/181038393796

$161 !!!!!!!!!!!!!



Even with three VW shops in the county, we played hell finding a local auto
parts shop that carried enough metric tools to make up a 'full set'. And
BOY, did that motor need tools! It blew up _something_ about every 1200
miles (maybe that's why they called the model "the 1200"???), and no head
gasket had ever been known to last on one of those engines for more than
5000 miles.


Never worked on one of those. I got the full set of 3/8" drive
Metric sockets (used) in Arizona back around 1964 or so for the little
50 cc Honda.

Enjoy,
DoN.


--
"Their mommies tell them they're special, Liberals just don't understand
that "special" is a polite euphemism for;
*window licker on the short bus*"

---
This email is free from viruses and malware because avast! Antivirus protection is active.
http://www.avast.com