"Larry Blanchard" wrote:

One question arose. At the very end of the article it mentions
installing four levelers and gives a diagram using Rockler part
number
31210.
-------------------------------------
I've used this technique to install several levelers as follows:

Drill blind hole and install triangular Tee-Nut.

Thread a jam nut onto threaded leveler, then thread into tee-nut.

Use an open end wrench to adjust then tighten jam nut to lock into
place.

Ya, you probably have to get on your belly.

It's messy, but it works.

Have fun.

BTW, this assumes you have sufficient stock to drill hole,
otherwise glue a block in corner and drill that.



Lew